How to order from hh2europa?

The following fuel economy products are presented on the OUR PRODUCTS ORDER FORM link here. Select your product(s), complete your details; the details of your order will be displayed at the bottom of the page. Then make your payment (paypal or bank transfer) and we will despatch by parcel post (range 2-5 days across Europe) by a secure, signed for, service.

All prices below include Vat; postage and packing extra.

Note: the only element not supplied in the full kit is the electrolyte (KOH). The instructions will explain how to purchase and use this.

NEW PRODUCTS - INTEGRATED COMPUTERISED SOLUTIONS: ADAPTING YOUR VEHICLE TO MAKE HHO WORK.

There are now three basis product solutions/kits available from the site, in addition to being able to order cells only either assembled or preassembled.  Please see the description for each product below, to find out which will suit your needs, before ordering. We have a range of products packaged with and without electronics suitable for different engine sizes from cars to trucks.

We have now introduced a comprehensive electronic package, which incorporates the cell(s)  and DEFIEs (Dual 02 sensor and MAP sensor).  The signals from the 02 sensors and MAP sensors are adjusted by our DEFIE to bring these values back into the correct range. The units are suitable for the latest ECU controlled fuel injection systems - from OBDII onwards. Our DEFIE will allow the engine to take full advantage of the higher octane, faster burning fuel mixture afforded by the induction of HHO.  

 TRADE DISCOUNT - PROFESSIONAL INSTALLATION GARAGE PARTNERS

We offer DISCOUNTS on volume purchases for trade installation. If you would like to PARTNER up and install the product locally (*on an EXCLUSIVE basis) and take advantage of these discounts and break into the hydrogen conversion buisness then contact our commercial department NOW.

PRODUCTS ORDER FORM 

• Select your hho  product(s)
• complete your details; (the details of your order will be displayed at the bottom of the page)
• Make your payment (paypal or bank transfer) and we will despatch by parcel post with average 2-3 days by a secure, signed for, service.

(Note: the only element not supplied in the full kit is the electrolyte (KOH). The instructions will explain how to purchase and use this).

 HHO PRODUCTS:

Standard HHO Kit

 FULL KIT SINGLE CELL - Euro 285

This hydrogen fuel cell kit includes all that you need to convert your vehicle to a hydrogen hybrid, converting water to hho gas as fuel additive to diesel or petrol engines. It does not come with electronics device and is therefore suitable for older pre OBDII computersied engine systems. In addition to the single assembled fuel economy cell (see below), the box of components includes: a 30amp relay, reservoir, safety valve*, electrical wiring, nylon re-enforced plastic pipe, electrical connectors, fuse holder and ties.

Included in the box is an instruction sheet, which will guide you through the process.
If you are not of a mechanical bent, a local mechanic will be able to install the unit in about an hour.

Our Hydrogen Dry Cell is assembled from all top of the line materials
The plates are 3.5" x 3.5" 18 gauge 316L stainless steel
The O Rings are 3/32" compressed to 1/16"
The O Rings are EPDM rubber heat resistant to 260 degrees
The Acrylic is 4"x4"x1/2 OR 7"x7"x1/2 thick rated at 300 degrees
The 2 hose barbs are 1/4"
The attachment bracket angles are aluminium
2 1/4-20 wing nuts for easy connection to the power source.

 Standard HHO Kit Including Integrated Computer Solutions

HHO KIT PLUS DUAL SENSOR DEFIE - Euro 575

A comprehensive electronic package, which incorporates the cell(s)  and dual DEFIEs (Dual 02 sensor and MAP sensor).  The signals from the 02 sensors and MAP sensors are adjusted by our DEFIE to bring these values back into the correct range.  The units are suitable for the latest ECU controlled fuel injection systems - from OBDII onwards. Our DEFIE will allow the engine to take full advantage of the higher octane, faster burning fuel mixture afforded by the induction of HHO.  

This dual sensor device manipulates the voltages relayed to the ECU via i) the oxygen sensors - by telling the ECU the fuel mixture is rich, it will tell the fuel injectors to inject less gasoline and use more hydroxy. And ii) the MAP/MAF sensor enhancer: this manipulates the voltages being sent to the ECU from the MAP or MAF sensor, effectively controlling the air/fuel ratio.

The electronics package we have developed over a three year period of time has the ability to allow the engine to have a normal cold start and warm up cycle. This is critical to avoid stalls and stumbling of the engine during warm up. All DEFIE units come with Ammeter and on/ off switch to be installed in the cab. The Ammeter is important as it will tell the operator that the hho unit is working and how much the current is drawing, which is a good indication of hho output. 

FEATURES:

HHO KIT PLUS SINGLE SENSOR DEFIE - Euro 525

As above but a single sensor device suitable for vehicles requiring adjustment to O2 sensor only.

HHO Fuel Economy Products - Cell Only  

 FUEL CELL (ONLY) ASSEMBLED Euro 155

This hydrogen fuel economy cell has been properly assembled and leak tested in our facility and is ready to be put to work giving greater economy and lower emissions for a long and reliable life.
Although the cell is compact it is very efficient and produces the most efficient amount of hydrogen with very low heat and this results in a long service life. Converts water to hho gas as fuel additive to diesel or petrol. 

Our Hydrogen Dry Cell is assembled from all top of the line materials

The plates are 8.9cm x 8.9cm ( 3.5" x 3.5") 18 gauge 316L stainless steel
The O Rings are 2.44mm ( 3/32" ) compressed to 0.8mm (1/16")
The O Rings are EPDM rubber heat resistant to 127 deg (C)  ( 260 degrees (F))
The Acrylic is 10cmx10cmx12.7mm) (4"x4"x1/2")  thick rated at 300 degrees(F) 148 deg (C)
The 2 hose barbs are 6.35mm ( 1/4" )
The attachment bracket angles are aluminium
2  6.4mm (1/4-20)  wing nuts for easy connection to the power source

FUEL CELL (ONLY) UNASSEMBLED Euro 125

 SORRY THIS ITEM IS NO LONGER AVAILABLE

This is a collection of highest quality components for you to assemble and connect to your own reservoir. Converts water to hho gas as fuel additive to diesel or petrol. The materials used are the very best we can get and will give excellent service and economy when assembled following the simple instructions.
Made from high quality 316L stainless steel which has the most resistance to corrosion and is designed to work reliably in the harshest environments.

PARTS LIST
3-POWER PLATES
8-NEUTRAL PLATES
2-PCS. ACRYLIC W/BARBS
12-O RINGS
2- PCS ALUMINIUM
4- 1/4-20 TAP BOLTS
8- 1/4-20 NUTS
2- 1/4-20 WING NUTS
10- WASHERS


Our Hydrogen Dry Cell is assembled from all top of the line materials
The plates are 8.9cm x 8.9cm ( 3.5" x 3.5") 18 gauge 316L stainless steel
The O Rings are 2.44mm ( 3/32" ) compressed to 0.8mm (1/16")
The O Rings are EPDM rubber heat resistant to 127 deg (C)  ( 260 degrees (F))
The Acrylic is 10cmx10cmx12.7mm) (4"x4"x1/2")  thick rated at 300 degrees(F) 148 deg (C)
The 2 hose barbs are 6.35mm ( 1/4" )
The attachment bracket angles are aluminium
2  6.4mm (1/4-20)  wing nuts for easy connection to the power source.
 

 COMMERCIAL KITS WITH MULTI CELLS        

2 Cell Euro 475, With Defie Euro 795

Suitable to support commercial mileage (2 cellls) and larger engined cars and vans.

These fuel from water kits are assembled from the highest quality materials and include a multi cell unit with a larger reservoir for cooling and to extend the top up intervals when used in a heavy industrial environment such as road going and large dumper trucks which cover large mileages. They come in dual cell and multi cell (four) for larger engine vehicles; two cell 3.5 to 7.5 litre engines, 4 cell 7.5 litres and over.
It includes a large reservoir (with secondary bubbler), 30amp relay, safety valve, electrical wiring, nylon re-enforced plastic pipe, electrical connectors, 30 amp fuse holder and ties.
Converts water to hho gas as fuel additive to diesel or petrol. The savings that these units create will make a critical difference on fuel consumption costs and lower emissions for a fleet operator.

We are bringing pre-assembled multi cell units for ease of installation on a volume basis to market. For more information please contact us.

POSTAGE (2-3 DAY PARCEL POST)

We use a dedicated signed for  parcel service facross Europe for security of supply.  Simply select the country option and the costs will automatically be calculated. If you wish to provide alternative delivery instructions for drop off and signature, should you not be home, please enter on the order form and we will pass onto to our delivery company.

Delivery 2-5 working days. This will vary depending on your location within Europe.
The parcel size for a single cell will be 20x20x20cm
Prices for postage, packing and fulfilment start from Euro19 per unit reducing  to Euro 3.9 per unit on an order of ten. For orders above ten please contact us to discuss opening an account with us and taking advantage of discounted prices.

Please note we are endeavouring to provide the most competitive prices are for despatch, while ensuring security of delievry. European postage is set in 5 bands from A to E. The countries with relatively expensive postage - reflecting customs and admin' difficulties are: Switzerland, Norway, Turkey, Lichenstein and Andorra - if you would like to arrange your own delivery please contact us direct.

TO ORDER your hydrogen fuel economy product go straight to the order now form.